Courier modems command reference manual

Courier 56K Business Modem Command Reference Modes of Operation. This chapter contains information about: Command and Online Modes; Controlling Local Echo; Follow the instructions in your fax software manual. Note: The modem's default operating mode is Data Mode. Most fax software automatically switches the device to Fax mode when you run. Introduction This guide is a command reference for the Courier www.doorway.ruhing mod em. It includes information about AT commands, S-Registers and troubleshooting If the information in the release notes shipped with your product differs from the information in this guide, follow the instructions in the release notes. Courier 56K Business Modem Command Reference Controlling Data Rates. This chapter contains information about: Serial Port Rates; Connection Rates; Controlling Link Speeds With N and U N and U Command Values; Configuring The High Speed LED; Setting DTE Rate To Kbps; Overview.

characters and the command, e.g., +++ to hang up the modem. To return to data mode from online command mode, you must issue the command ATO. To send AT commands to the modem you must use a communications program, such as the HyperTerminal applet in Windows 98/95 and NT , or some other available terminal program. You can issue commands to the. If DIP switch 8 is OFF, power off the Courier 56K Business Modem, set the switch ON, and power on the Courier 56K Business Modem again. Then try typing AT Enter again. Make sure that verbal result codes (status messages) are enabled. Send these commands to the Courier 56K Business Modem. Courier 56K Business Modems will accept an invalid password entry, but will lock out users from the security commands. For example, if the password is Green, but you enter GREEN, an OK is displayed.

ABOUT THIS GUIDE. Introduction. This guide is a command reference for the Courier www.doorway.ruhing modem. It includes information about AT commands, S-Registers. This guide demonstrates configuration of US Robotics Sportster and Courier modems for use in a dial-in application in a UNIX-type. Use DIAGNOSTICS on the command line to see the complete modem communications. SEE MODEMS REFERENCE MANUAL FOR FURTHER INFORMATION. cc:MOBILE FOR WINDOWS.